Door & Window Sensor
Hall-Effect sensor
1 cm detection range
IP50 equivalent
EU, US, and Asia frequency supported
LoRaWAN 1.0.3
0 to 50°C operation temperature range
The Tabs Door & Window sensor fits into any interior design and is easy to install. It is composed of two parts. The main body contains active electronics to measure magnetic fields and transmit data, if any changes, to a LoRaWAN network. The other part is a permanent magnet of sufficient field strength to be detected by the Hall-Effect sensor on the main body.
You can find the JS decoder in the download section below.
You can find the JS decoder in the download section below.
Specification
Model Name
TBDW100
Frequency
868MHz & 915MHz
RF TX power
US: +19dBm
EU: +17dBm
Antenna Gain
-2dBi Peak, -5dBi Avg
Battery Type
3.6V 1⁄2 AA Li-SOCl2, 1200mAh
RF Sensitivity
-135dBm
Battery Lifetime
Up to 16 months
Average Current
135mA maximum / 100uA minimum
Protocol
LoRaWAN 1.0.3
Operation Temperature
0 to 50°C
Environmental Rating
IP50 equivalent
Dimensions
50mm x 20mm x 50mm
Weight
30g without battery 40g with battery
Detection Distance
1 cm
Sensor
Hall-Effect sensor
Type Approval
CE/FCC/IC
